ASME B16.5 FLANGES DIMENSIONAL TOLERANCES:
| WELDING NECK FLANGES | ||||
| 0 | Outside Diameter | When 0 is 24″ or less | ±0.06″ | ±1.6 mm |
| When O is over 24” | ±0.12″ | ±3.2 mm | ||
| R | Diameter of Contact Face | 0.06” (1.6 mm) raised face | ±0.03″ | ±0.8 mm |
| 0.25″ (6.4 mm) raised face | ±0.02″ | ±0.5 mm | ||
| A | Diameter of Hub at Point of Welding | NPS 5 and smaller | +0.09″, -0.03″ | +2.4 mm, -0.8 mm |
| NPS 6 and larger | +0.16″, -0.03″ | +4.0 mm, -0.8 mm | ||
| B | Inside Diameter | NPS 10 and smaller | ±0.03″ | ±0.8 mm |
| NPS 12 to 18, inclusive | ±0.06″ | ±1.6 mm | ||
| NPS 20 and larger | +0.12″, -0.06” | +3.2 mm, -1.6 mm | ||
| X | Diameter of Hub at Base | When Hub Base is 24″ or less | ±0.06″ | ±1.6 mm |
| When Hub Base is over 24″ | ±0.12″ | ±3.2 mm | ||
| c | Thickness | NPS 18 and smaller | +0.12″, -0.00″ | +3.2 mm, -0.0 mm |
| NPS 20 and larger | +0.19″, -0.00″ | +4.8 mm, -0.0 mm | ||
| Drilling | Bolt Circle Diameter | ±0.06″ | ±1.6 mm | |
| Bolt Hole Spacing | ±0.03″ | ±0.8 mm | ||
| Eccentricity of Bolt Circle and Facing with Respect to Bore | NPS 21/2 and smaller | ±0.03″ | ±0.8 mm | |
| NPS 3 and larger | ±0.06″ | ±1.6 mm | ||
| Length Through Hub | NPS 10 and smaller | ±0.06″ | ±1.6 mm | |
| NPS 12 and larger | ±0.12″ | ±3.2 mm | ||
| SLIP-ON, LAP JOINT, SOCKET WELDING, THREADED and BLIND FLANGES | ||||
| O | Outside Diameter | When O is 24″ or less When O is over 24″ |
±0.06″ ±0.12″ | ±1.6 mm ±3.2 mm |
| R | Diameter of Contact Face | 0.06″ (1.6 mm) raised face 0.25″ (6.4 mm) raised face | ±0.03″ ±0.02″ | ±0.8 mm ±0.5 mm |
| B | Inside Diameter at Face of Socket Welding Flanges
Inside Diameter of Slip-On, Lap Joint, and Socket Welding |
NPS 10 and smaller NPS 12 through 18, inclusive NPS 20 and larger |
±0.03″ ±0.06″ +0.12″, -0.06″ | ±0.8 mm ±1.6 mm +3.2 mm, -1.6 mm |
| NPS 10 and smaller NPS 12 and larger |
+0.03″, -0.00″ +0.06″, -0.00″ | +0.8 mm, -0.0 +1.6 mm, -0.0 mm |
||
| Q | Counterbore, Threaded Flanges | NPS 10 and smaller NPS 12 and larger |
+0.03″, -0.00″ +0.06″, -0.00″ | +0.8 mm, -0.0 + 1.6 mm, -0.0 mm |
| X | Diameter of Hub at Base | NPS 12 and smaller NPS 14 and larger |
+0.09″, -0.06″ ±0.12″ | +2.4 mm, -1.6 ±3.2 mm |
| c | Thickness | NPS 18 and smaller NPS 20 and larger |
+0.12″, -0.00″ +0.19″, -0.00″ | +3.2 mm, -0.0 +4.8 mm, -0.0 mm |
| Drilling | Bolt Circle Diameter Bolt Hole Spacing | ±0.06″ ±0.03″ | ±1.6 mm ±0.8 mm |
|
| Eccentricity of Bolt Circle and Facing with Respect to Bore | NPS 2V2 and smaller NPS 3 and larger |
±0.03″ ±0.06″ | ±0.8 mm ±1.6 mm |
|
| Overall Length Through Hub | NPS 18 and smaller NPS 20 and larger |
+0.12”, -0.03” +0.19”, -0.03” |
+3.2 mm, -0.8 mm +4.8 mm, -1.6 mm |
|
Industrial Flanges Available Materials and Grades
- Inconel 625 Flanges
- Inconel 660 Flanges
- Inconel 690 Flanges
- Inconel 718 Flanges
- Inconel 825 Flanges
- Inconel 800 Flanges
- Titanium Grade 2 Flanges
- Titanium Grade 5 Flanges
- Duplex S31803 Flanges
- Duplex S32205 Flanges
- Super duplex S32520 Flanges
- Super duplex S32750 Flanges
- Hastelloy C22 Flanges
- Hastelloy C276 Flanges
- Monel 400 Flanges
- Monel K500 Flanges
- Stainless Steel 316TI Flanges
- Stainless Steel 904L Flanges
- Copper nickel 90/10 Flanges
- Copper nickel 70/30 Flanges
- Alloy 20 Flanges
- Nickel 200 Flanges
- Nickel 201 Flanges