Ample Alloys is globally accepted Manufacturers and Exporters of ASME SB366 Monel K500 Buttweld Fittings, Monel K500 Elbow, DIN 2.4375 Cross, ANSI B16.9 Reducers, UNS N05500 Alloy K500 Tee, MSS-SP-43 End Caps, 3D Pipe Bends, Seamless Stub Ends.
Table of Content
- ASME SB366 Monel K500 Buttweld Fittings Specifications
- WERKSTOFF NR. 2.4375 Pipe Fittings Chemical Composition
- UNS N05500 Buttweld Fittings Mechanical Properties
- Alloy K500 Buttweld Fittings Equivalent Material Grades
- ASTM B366 Alloy K500 Buttweld Fittings Types
- Alloy K500 Fittings Similar Products
- Monel K500 Buttweld Fittings Applications
- In Stock Buttweld Fittings Monel Grades
- ANSI Buttweld Fittings Dimensional Tolerances
- ASME B16.9 Butt Weld Fittings Dimensions
- Buttweld Fittings Weights Chart
Mumbai, India based Suppliers of ASTM B366 Alloy K500 Buttweld Fittings. Get Here Dimensions, Type, Specifications, Pressure Rating, Weight Chart, Equivalent, Sizes, Price List. Buy UNS N05500 Monel 90 Degree Elbow in Australia, Italy, USA, Canada, Latin America, Qatar, Kuwait, Dubai, California, Europe, Florida, Georgia, Houston, Korea, Japan, Michigan, UK, Wisconsin, Zambia.
Monel K500 Buttweld Pipe Fittings Specifications
- Specifications: ASTM B366 / ASME SB366
- Type: Seamless Fittings / Welded Fittings / Fabricated Fittings
- International Specifications: WERKSTOFF NR. / UNS / JIS / BS / GOST / AFNOR / DIN / EN
- Welded Pipe Fittings Size: 1/2″ – 72″
- Seamless Butt Weld Fittings Size: 1/2″ – 24″
- Material Grade: Monel K500
- Bending Radius: R= 10D, 8D, 6D, 5D, 3D, 2D, 1D, 1.5D
- Thickness Range: With NACE MR 01-75: Schedule 10, Schedule 40, Schedule 80, XS, XXS and SCH 160
- Grades: Monel K500 / 2.4375 / UNS N05500
- Standards: ANSI/ASME B16.9, MSS-SP-43/48/59, ASME B16.28, B16.25
Monel K500 Pipe Fittings Chemical Composition:
| Grade | Monel K500 |
|---|---|
| C | 0.25 max |
| Ni | 63.0 min |
| Mn | 1.5 max |
| Al | 2.3 – 3.15 |
| Fe | 05 – 2 |
| Si | 0.5 max |
| S | 0.010 max |
| Cu | 27.0 – 33.0 |
| Ti | 0.35 – 0.85 |
| Cr | – |
Monel K500 Pipe Fittings Mechanical Properties:
| Grade | Monel K500 |
|---|---|
| Elongation | 20 % |
| Density | 8.44 g/cm3 |
| Melting Point | 1350 °C (2460 °F) |
| Yield Strength (0.2%Offset) | Psi – 160000 , MPa – 1100 |
| Tensile Strength | Psi – 115000 , MPa – 790 |
Monel K500 Buttweld Fittings Equivalent Material Grades:
| UNS | WERKSTOFF NR. |
|---|---|
| N05500 | 2.4375 |
Monel K500 Buttweld Pipe Fittings Types
- Monel K500 Long Stub End
- Monel K500 180° LR Elbow
- Monel K500 Mitered Pipe Bend
- Monel K500 45 Degree Elbow
- Monel K500 Seamless Pipe Bend
- Monel K500 3D Elbow
- Monel K500 Long Radius Elbow
- Monel K500 Equal Cross
- Monel K500 J Pipe Bend
- Monel K500 180° SR Elbow
- Monel K500 Short Stub End
- Monel K500 Unequal/Reducing Cross
- Monel K500 5D Pipe Bend
- Monel K500 Equal Tee
- Monel K500 Lap Joint Stub End
- Monel K500 1.5D Elbow
- Monel K500 Hot Induction Pipe Bend
- Monel K500 10D Pipe Bend
- Monel K500 90° LR Elbow
- Monel K500 Eccentric Reducer
- Monel K500 Welded Pipe Bend
- Monel K500 45° LR Elbow
- Monel K500 45° SR Elbow
- Monel K500 Short Radius Elbow
- Monel K500 90 Degree Elbow
- Monel K500 U Pipe Bend
- Monel K500 5D Elbow
- Monel K500 Unequal/Reducing Tee
- Monel K500 Piggable Pipe Bend
- Monel K500 3D Pipe Bend
- Monel K500 1D Elbow
- Monel K500 Long Radius Pipe Bend
- Monel K500 90° SR Elbow
- Monel K500 180 Degree Elbow
- Monel K500 End Caps
- Monel K500 Concentric Reducer
Monel Alloy K500 Similar Products
Monel Alloy K500 Buttweld Fittings Applications
Monel K500 is a nickel-copper alloy which combines the Alloy 400 corrosion resistance with high strength erosion resistance and corrosion fatigue. It maintains its strength up to 1200oF while maintaining hardness and ductility even at the lower temperatures up to 400oF. It has greater tendency to prevent stress corrosion cracking than Nickel 400. Higher yield strength and tensile strength. Alloy K500 used in applications where corrosion might be a concern:
- Marine Service
- Chemical Processing
- Pulp Processing in Paper Production
- Oil and Gas Production
- Food Processing and Electronic Industries
We at Ample Alloys provide all necessary Material Testing Report and Documentation and provide packaging of the products i.e. UNS N05500 Butt Welding Fittings as per clients requirement or as per industry standards to keep pipe fittings damage free during transit.
Advantages of Monel:
- To acids and alkalis, it has a high corrosion resistance
- High mechanical strength
- Ease of brazing, welding, and soldering.
- Easy to shape and form i.e. Good Ductility
- Availability in different forms like Pipe Fittings and Flanges
- Ability to hold up in low temperatures as well as high-temperature situations
- Attractive appearance and finishes
