Ample Alloys is globally accepted Manufacturers and Exporters of ASME SB366 Inconel 718 Butt Welding Bends, ANSI B16.9 Reducers, UNS N07718 Alloy 718 Tee, DIN 2.4668 Cross, MSS-SP-43 End Caps, Grade 718 Seamless Stub Ends, Inconel 718 Elbow.
Table of Content
- Inconel 718 ASTM B366 Buttweld Fittings Specifications
- WERKSTOFF NR. 2.4668 Pipe Fittings Chemical Composition
- UNS N07718 Buttweld Fittings Mechanical Properties
- Alloy 718 Buttweld Fittings Equivalent Material Grades
- ASME SB366 Alloy 718 Buttweld Fittings Types
- Inconel 718 Similar Products
- Inconel Alloy 718 Buttweld Fittings Applications
- In Stock Buttweld Fittings Inconel Grades
- ASME B16.9 Butt Weld Fittings Dimensions
- Buttweld Fittings Weights Chart
- ANSI Buttweld Fittings Dimensional Tolerances
Mumbai, India based Suppliers of ASTM B366 Inconel 718 Buttweld Fittings at market leading Price List in USA, UK, Australia, Italy, Belgium, Canada, Latin America, California, Qatar, Kuwait, Canada, Dubai, Europe. Get here Types, Diagram, Information, Dimensions, Sizes, Material, Pressure Rating, Equivalent, Specifications, Temperature, Weight Chart.
Inconel 718 Buttweld Pipe Fittings Specifications
- Seamless Butt Weld Fittings Size: 1/2″ – 24″
- Welded Pipe Fittings Size: 1/2″ – 72″
- Specifications: ASTM B366 / ASME SB366
- Thickness Range: With NACE MR 01-75: Schedule 10, Schedule 40, Schedule 80, XS, XXS and SCH 160
- Standards: ANSI/ASME B16.9, MSS-SP-43/48/59, ASME B16.28, B16.25
- Material Grade: Inconel Alloy 718
- International Specifications: WERKSTOFF NR. / UNS / JIS / BS / GOST / AFNOR / DIN / EN
- Type: Seamless Fittings / Welded Fittings / Fabricated Fittings
- Grades: Inconel 718 / 2.4668 / UNS N07718
- Bending Radius: R= 1.5D, 1D, 2D, 3D, 5D, 6D, 8D, 10D
Inconel 718 Pipe Fittings Chemical Composition:
| Grade | Inconel 718 |
|---|---|
| C | 0.08 max |
| Mn | 0.35 max |
| Si | 0.35 max |
| Fe | Balance |
| S | 0.01 max |
| Cr | 17.0 – 21.0 |
| Al | 0.2 – 0.8 |
| Ni | 50.0 – 55.0 |
Inconel 718 Pipe Fittings Mechanical Properties:
| Element | Inconel 718 |
|---|---|
| Density | 8.14 g/cm3 |
| Melting Point | 1400 °C (2550 °F) |
| Tensile Strength | Psi – 80,000 , MPa – 550 |
| Yield Strength (0.2%Offset) | Psi – 32,000 , MPa – 220 |
| Elongation | 30 % |
Inconel 718 Buttweld Fittings Equivalent Material Grades:
| WERKSTOFF NR. | UNS |
|---|---|
| N07718 | 2.4668 |
Inconel 718 Buttweld Pipe Fittings Types
- Inconel 718 Mitered Pipe Bend
- Inconel 718 45 Degree Elbow
- Inconel 718 Long Stub End
- Inconel 718 Long Radius Pipe Bend
- Inconel 718 90° SR Elbow
- Inconel 718 180° LR Elbow
- Inconel 718 Piggable Pipe Bend
- Inconel 718 180 Degree Elbow
- Inconel 718 1D Elbow
- Inconel 718 Concentric Reducer
- Inconel 718 End Caps
- Inconel 718 3D Pipe Bend
- Inconel 718 Equal Cross
- Inconel 718 Short Stub End
- Inconel 718 90 Degree Elbow
- Inconel 718 Unequal/Reducing Cross
- Inconel 718 J Pipe Bend
- Inconel 718 U Pipe Bend
- Inconel 718 5D Elbow
- Inconel 718 Long Radius Elbow
- Inconel 718 180° SR Elbow
- Inconel 718 3D Elbow
- Inconel 718 Unequal/Reducing Tee
- Inconel 718 Seamless Pipe Bend
- Inconel 718 Short Radius Elbow
- Inconel 718 45° LR Elbow
- Inconel 718 5D Pipe Bend
- Inconel 718 Hot Induction Pipe Bend
- Inconel 718 Lap Joint Stub End
- Inconel 718 Welded Pipe Bend
- Inconel 718 10D Pipe Bend
- Inconel 718 Equal Tee
- Inconel 718 1.5D Elbow
- Inconel 718 Eccentric Reducer
- Inconel 718 90° LR Elbow
- Inconel 718 45° SR Elbow
Inconel 718 Similar Products
Inconel 718 Buttweld Pipe Fittings Applications
Inconel Alloy 718 Buttweld Fittings can be used in a wide variety of industries to end, divide or alter the flow of fluids. These operations include the following:
- Gas Processing
- Chemical Processing
- Petrochemical Facilities
- Cryogenic Plants
- Paper Production
- Waste Treatment Facilities
- Nuclear Power Plants
- Breweries
The wide range of applications demonstrates the robustness of a Inconel Alloy 718 Fittings and how much this particular type of fitting is relied upon. We at Ample Alloys provide all necessary Material Testing Report and Documentation and provide packaging of the products i.e. Grade 718 Fittings as per clients requirement or as per industry standards to keep Tees, Elbow, Reducers, Cross, Etc. damage free during transit.
